Home » Uncategorised » Page 3

Category: Uncategorised

Irrigation Systems

Bowling green irrigation is one of the areas of bowling green maintenance that raises the most questions.

On the face of it, this appears to be a simple subject; install sprinklers (watering systems), switch them on when it’s dry and the green gets evenly watered and everybody’s happy!

In reality it is a minefield of decisions including; best system design for your green, water storage, watering schedules, when, how and how much to water, green speed, disease, dry patch, thatch etc.

I have assembled some more in-depth information regarding the watering of bowling greens here.

If you need any help with this subject please feel free to drop me a line directly.

Spring green renovation.

the new season is almost here

Spring bowling green renovation should be focussed on 3 main components:

1. the completion of the winter, deep aeration program
2. rejuvenation and aeration of the green surface
3. nutritional corrections

On greens in the non-drought affected areas of the UK, it should still be OK to carry out slit tining.

This is the last time we will get a chance to do this until autumn.

Two final operations with this machine will make all the difference to the greens ability to resist compaction in the early part of the season.

In drier areas, mini solid tining might be preferable and this can be done in addition to the slit tining in other areas.

If you have a thatchy green; identified by spongy turf, disease problems in winter and general poor health; you should scarify the green quite harshly in two directions to remove some of the fibre and mat that has built up over the winter months.

On healthier greens, where over-seeding was carried out last autumn you should avoid heavy scarification.

Lighter verti-cutting can commence once the sward is growing vigorously in May.

A question I get asked a lot is:

“ How much top-dressing should be applied in spring?”

The answer is a resounding “None”

Good luck with your spring bowling green renovation work.

Tomorrow we will have a look at turf nutrition requirements for pre-season

More detailed information on aeration here, thatch here and a range of one page factsheets here

Dealing with Snow and Ice on Your Green

A couple of years ago we were hit by severe snow and ice in some parts of the country and it raised a few questions about how best to deal with severe winter weather on bowling greens. I am re-visiting this today as a timely reminder now that we are in the winter season. Hopefully this will be a good omen and we wont get any snow this year!

The unusually early onset of winter in 2009 and 2010 created a few problems for most of us and seriously curtailed many winter maintenance programs.

We received a lot of enquiries asking for advice on dealing with the snow and ice on bowling greens and the aftermath of deep snow cover.

The main concern during and after snow cover is the potential for the outbreak of fungal diseases such as fusarium patch; and indeed, fusarium might well be encountered after the snow has melted. Although many clubs will have applied a preventative fungicide in the Autumn, this might not have provided total protection, but should have minimised the risk of attack.

When the snow has gone you might well find active areas of Fusarium and this should be treated with a curative fungicide containing the active ingredients iprodione  or chlorothalonil applied as per the manufacturer’s advice.

Many of the enquiries we have received have been related to the actual snow cover and clubs have been worried about the prolonged cover of snow and ice on their turf and have asked if they should be pro-active and do something to remove the ice cover. My advice would be to leave it and allow it to melt naturally.

Attempting to remove ice could result in damage to the turf, soil structure and grass plants.

Please also remember that even after the snow and ice has gone the underlying soil could still be frozen and any activity on the green could result in damage to the root system of the green.

Please make sure that the green has completely thawed by probing the soil before commencing (and catching up) with your winter maintenance program.

Any questions, please don’t hesitate to contact me.

Doing Nothing vs Trojan Horses

With the end of the bowling season in clear sight, many clubs will have acquired a familiar temporary feature over by the roadside hedge somewhere. If you look closely there will probably be a pallet or five of bagged top-dressing, ready to go on the green as part of the autumn renovation program.

The bags might be plain or they might be covered in text and graphics proclaiming all of the benefits for your turf that are held within.

They are essentially Trojan Horses, in that they appear to be bearing good news and gifts, but they are actually full of sand (up to 90%) and represent the continued insistence of many clubs and consultants to pursue a program of desertification of bowling greens in the UK.

When your green was first constructed, it probably had an 8-10” (200-250mm) deep layer of topsoil (rootzone). An average bulk density for topsoil would be around 1.6 tonnes/m3. If we say that the average green is 36m X 36m we get an area of 1296m2. The volume of soil required to fill this is calculated thus:

 1296 X 0.25 = 324m3

Using our bulk density average of 1.6 we can calculate weight of soil required as follows:

324 X 1.6 = 518 Tonnes. So our average green was built using approximately 518 tonnes of topsoil.

Most hollow tining operations can penetrate the soil to 4 inches (100mm) and this is usually used in conjunction with top-dressing. This then means that top-dressing operations have been concentrated on about 40% of the actual soil used to build the green (the top 4 inches). 40% of 518 tonnes is 207 tonnes.

30 years of top-dressing with 5 tonnes of material each time is equal to applying 150 tonnes of highly sandy material and this disregards the soil being removed by the hollow tiner! This also assumes that your club only jumped on the train to la la land in the 1980’s; many have been at it for at least a decade before that. I also know of some greens where they are routinely throwing 10 tonnes of straight sand on every year, so these figures are only averages and are probably leaning towards the less crazy end of the spectrum.

Is it any wonder then that greens suffer from localised dry patch, excessive thatch build up, powder dry inert soil, compaction, disease, low microbe populations etc, when almost all of the top 4 inches of the green has been replaced by sand?

If this is the plan for your club this autumn it would be better for your green, if you just do nothing. Yes, even neglecting the green and failing to undertake any autumn renovation would be much less harmful to the long term health and performance of the green than following this program.

Top dressing and over-seeding in Spring

seeding in spring is not recommended

I’ve had a couple of enquiries asking about the correct methods, quantities and materials for Spring (pre-season) over seeding and top dressing of bowling and golf greens.

This is easy; the correct thing to do in this respect is…Nothing!

Over-seeding into a sward that is about to become very vigorous as spring progresses is futile. The new seedlings don’t stand a chance against the locals.

Any new seedlings that did by some miracle survive the competition from the existing grasses would quickly succoumb to the heavy wear and tear from machinery and foot traffic the green is about to endure for the next 6 months.

Top-dressing should be avoided for all of the reasons detailed elsewhere on the site (see here), but also because applying a sandy top-dressing at this time will cause the following additional problems:

1. blunt mowers
2. sand pick up on bowls and scratched bowls
3. damage to grass plants from abrasion and blunt mower blades

So there’s an easy time and money saver for today…more on top-dressing here.